Exhaust gas heat recovery. Rising energy prices are a major challenge for many industries, and energy efficiency is becoming a crucial success factor. The good news is that many plants have a considerable unexploited potential for energy savings by recovering exhaust- or process flue gas and, as an added bonus, reduce CO 2 emissions.
The exhaust gas heat exchanger uses the waste heat generated during energy generation in the form of flue gases. To make effective use of the available heating power, the residual heat of this exhaust gas is used to add it to a second medium for example the heating water. In this way, the existing residual heat can be significantly reduced by using it for recovery. Flue gas heat exchanger Waste heat recovery system Another advantage of the flue gas heat exchanger is that it usually uses water for heat recovery. This means that some of the pollutants can already be filtered out of the flue gases and thus also reduce the strain on the filter systems for flue gases. The resulting condensate can usually be discharged directly into the sewer system.
The integrated flue gas heat exchanger is installed in the exhaust chamber ex works as part of the boiler, is connected on the water side and is ready for immediate use. Also available as a stand-alone version which can be easily retrofitted. Bosch also provides the stainless steel condensing heat exchanger as a separate, ready-to-connect module. Heat Exchangers and Heat Recovery - Accelerating Gas Fuel Heat recovery refers to the various methods employed to capture waste heat from combined heat and power (CHP) generation systems. For many prime movers, heat recovery will take the form of a heat exchanger attached to the exhaust flue, although substantial thermal energy is also often recovered from the jacket cooling water, and to a lesser extent from the lube oil, of engine-based systems.
The vented exhaust from combustion can be ducted to a heat recovery unit with a gas-to-liquid heat exchanger to pre-heat boiler feed water or another nearby process (see figure 1). Many heat related processes are precededor followed by a heated wash or rinse tank which are alsogood candidates for recovered heat. New Technology Will Recover Heat &Water from Flue Gas Aug 23, 2016 · Flue Gas Water and Heat Recovery with a two-stage TMC is shown here. Preliminary Aspen study shows, if the TMC/stage 1 is integrated into the steam cycle, it can increase the
Aug 01, 2020 · In this technology, the core is the heat exchanger type exhaust gases/water, in which flue gases heat up water as a medium. Preferably, the WHR system should be built in a hall together with the heating system because the implementation of a recovery system in an existing hall requires changes in the radiant heaters flue gases discharge system, which means pushing up additional costs. Research and Application of Flue Gas Waste Heat Recovery Jan 01, 2016 · Zhao et al. designed a type of system for coal-fired boiler, which can reduce exhaust flue gas temperature to 60-70â and recycle waste heat in the flue gas to heat the return water. It utilized plate heat exchangers and absorption heat pump systems to heat return water, which helps improve the heating efficiency.
Your email address will not be published.*